Adapter
FSP060-10AD

 

FEATURES

  • High efficiency
  • Low Noise and ripple
  • output over voltage protection
  • Short circuit protection on all outputs
  • Over current protection
  • Approved by UL 1950, CSA 22.2, IEC 950, TUV EN 60950
  • Complies with FCC part 15 subpart J class B 115 VAC operation and CISPR 22 230 VAC operation
  • 100% burn-in under high ambient temperature (40 degree C)
  • MTBF above 100,000hrs at 25 degree C
  • 100% Hi-pot & ATE tested

ELECTRICAL SPECIFICATIONS

INPUT
  • Voltage: 100~240VAC
  • Frequency: 47Hz to 63Hz
  • Input Current: 1.5A(RMS) for 115 VAC, 0.8A(RMS) for 230 VAC

OUTPUT:

Output Voltage Output Current
Nominal Regulation Ripple & Noise Min. Max.
+19.0V 18.4V-19.5V 280mV 0.0A 3.16A

 

TECHNICAL SPECIFICATION

  • Temperature range: operating 0 degree C~40 degree C; Non-operative: -10 degree C~70 degree C
  • Transient response: Output voltage returns in less than 1 ms max. following a 25% load change
  • Hold up time: 9ms minimum at full load & nominal input voltage
  • Humidity: 10~95% RH
  • Efficiency: 85% Min., at 115 VAC full load
  • Inrush current: 40A max. for 115 VACor 80A max. for 230 VAC at 25 degree C ambient cold start
  • Dimension: LxWxD = 110x63.5x33 mm

SAFETY SEALS

MECHANICAL DRAWINGS

  • For Detail Design drawing, please e-mail us.
 

 

Copyright 1999-2002 Powertech Systems Corp.  All Rights Reserved